Subject:	no-start problem
Question:	ok i know it is a reman ecu and we already scanned the original and the aftermarket and the only thing it shows is that the millisecs on the fuel is way to high it is like 48 millisec when normal range is supposed to be between 4msc-28msc everything else seems to be ok
Answer:	John, I'll just assume your ECU is not the problem. You may need to replace your fuel pressure regulator and check your intake hoses and throttle body. From your latest update, your computer is either thinking that you are at WOT, so its trying to pump as much gas into your engine as possible. A faulty fuel pressure regulator will not always show up in your ECU codes. Also, if your ignition timing is off, your fuel rate could be too high. A simple tune-up may not help; you'll want someone to check the entire fuel system and ignition timing. That may help.